Pair of EndCaps for Yakima CoreBar.
Pair of EndCaps for Yakima JetStream bars.
Black replacement knobs for Bones 2 and Bones 3.
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
$14.99 $49.99 70% Savings
Use this handy adapter to mount any 20mm Thru Axle bike to a standard QR!
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - L 15.50" x W 1.00"
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
- Converts 1 ¼" Hitch Receiver to fit 2" Hitch - Compatible with all current Saris Hitch Racks (contact Saris for older model compatibility).
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Thule's Load Bar End Caps are replacement end caps for rectangular load bars.
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
Yakima Load Bar End Caps. - For 86" load bars only
Long Wheel Replacement Straps (2 Pack)
Kuat's 1.25" to 2" adapter mounts to your 1.25-inch Kuat Alpha, Beta, or Sherpa rack, allowing them to fit a 2-inch receiver. Mounting hardware included.
The Thule Xadapt 2 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid or Xsporter load bars. Please contact us with any questions regarding compatibility.
Yakima's SKS Accessory Lock Housing is a great way to make sure your bike and luggage mounts stay put. It works with Yakima's SKS lock cores (Same Key System; sold separately) so that you only need to keep track of one key for all your rack-security needs. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately
Mount your bike nearly anywhere with Swagman's Claw. This 9mm fork mount bolts to truck beds, SUVs, or anything you can think of. And, the burly quick-release keeps your fork securely locked down.
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface. This mount works for most quick-release fat bike forks.
Thru-axle adapter for the Kuat TRIO rack.
An adapter for Kuat's Trio roof rack to make it compatible with most 15mm thru-axle fat bike forks. Includes rear tire strap extension. Available in 142mm and 150mm-wide models.
$29.99 - $36.99
Evo's Fork Mount Carrier easily installs in your truck bed or anywhere else you need a simple fork mount carrier. The 15 and 20mm mounts use a Teflon sleeve to protect your axle, and the 9mm includes a QR skewer.
These durable, easy to install felt pads are custom shaped for SweetRoll and HullHound and provide additional protection for your boat. Sold as pairs.
Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.
Yakima's Hood Anchor creates a secure attachment point at your hatch, trunk or hood for bow and stern tie downs. Sold in pairs, they’re highway-speed strong, coated to protect your vehicle’s paint job, and super easy to use - just drop them in place. Product Details - Creates a secure attachment point for bow and stern tie downs - Fits easily under a hood, hatch or trunk - Installation is simple - just drop them in place - Durable coated strap protects your vehicle's paint - Sold as a pair Technical Specs - Weight: 0.43 lbs - Dimensions: L 6.50in x W 2.00in x H 10.12in
These replacement parts work with Yakima's StrapThang.
Thru-axle adapter works with WheelHouse to hold wheels with 12mm/15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front Hubs TECHNICAL SPECS - Weight: 0.44 lbs - Dimensions: L 9.00” x W 0.75” x H 2.00”
Yakima's Trunk-Mount Security Strap is a steel-reinforced strap that lets you secure your trunk rack to your vehicle.
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage -Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in
Page 1 of 11 Next page