Other

Developed in the cold Minnesota weather, Wolf Tooth Singletrack Pogies handle the ever-changing winter weather while keeping hands warm. - Easy hand access - Adjustable cuff allows you to adapt the warmth of the pogie based on the weather conditions and how hard you are working - With the cuffs folded down the hand opening flares open and provides coverage up to your wrist - Velcro, snap, and strap cinch seal around handlebar and cables - Patent-pending design with three distinct warmth settings: Warmest (cuff up, zipped up), Warmer (cuff up, zipper open), Warm or Singletrack Mode (cuff folded down) - Waterproof and durable rip-stop nylon construction Compatibility - Fits most flat bars. The inner diameter of the handlebar should be between 17mm and 20mm. For most carbon bars and lighter aluminum bars, it is helpful to wrap a few layers of electrical tape around the plugs before inserting into the bars and tightening the screws. Tech Specs - Weight: 280g / 20g plugs - Material: 420D Diamond Rip-Stop Nylon laminated with jersey and closed-cell foam. Fabric is waterproof but seams are not waterproof sealed. - Includes: Two Pogies and two durable quick-disconnect handlebar plugs

Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit

Upgrade or refresh your bike. - When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. - Replacement chainstay strike plate for 2011 Speed Concept & 2012 Madone - Self-adhesive

Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.

Keep your ride upright and looking fly with Specialized's Center mount kickstand! - Made of durable aluminum.

This plug-in throttle mounts next to your HMI on your Globe bike and allows you to motor up to 20mph without needing to pedal. Need to go faster? Pedal assist will still be there to give you a boost to 28mph after the throttle reaches its limit. The throttle’s extra burst of torque makes entering and exiting traffic safer and faster but still allows you to use pedal assist to increase efficiency and range. - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Max throttle speed: 20mph. Does not affect pedal-assist performance or top speed. - Requires installation of the free Globe phone app to activate.

Turbo Chainstay-Mounted Kickstand - 323mm.

Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.

We understand that your bike is a prized possession and leaving it unattended, even when secured, can be risky. Scout provides unparalleled bike security by combining both an extremely loud 85db bike alarm function with a highly accurate bike finder, using Apple’s ‘Find My’ app. The future of bike security is here. Once armed, any movement of a Scout fitted Bike will trigger the motion-sensitive audio alarm discouraging any further movement and alerting the bike’s owner, both by the sound of the alarm and via a notification that is automatically sent to the owner’s iPhone (when in Bluetooth range). Then in a scenario where a bike fitted with Scout is not where the owner has left it, it can be quickly located using Apple’s network via the ‘Find My’ app. - Compatible with iOS only - Motion-sensitive 85 db audio alarm for immediate deterrence - Can be located quickly using Apple's 'Find My' app - Operated using Knog's iOS app - Mounts to standard water cage braze-ons - Can be mounted under water cage for discretion - Use supplied anti-tamper screws to mount securely - Neon silicone cover provided to advertise security device (if desired) - Arm / disarm using button (within 1.5 m) on app within bluetooth range - LEDs show alarm status & battery charge - USB-C rechargeable with 2 to 6 month battery (pending usage) - Low battery notifications when you have just 20% remaining - Water resistant IP66 rating (wash-proof) - Weighs just 25 grams - USB-C charging cable not included If you want peace-of-mind that you've done everything you can to secure your bike, Scout Bike is an essential piece of kit.

- Axle mount - Made of steel - Fits 16-inch wheel bikes

- Center mount - Made of alloy - Button type tool-free adjust - 26'' to 700C

- Center mount - Made of alloy - Steel top plate - Adjustable with lockscrew - Fits bikes from 24-inch to 700C wheels

- Stable 2-Stay mount - Made of alloy - Button type tool-free adjust - Fits wheels from 20-inches to 700C

Kickstands make it easy to park your bike anywhere while keeping it from getting damaged. - Perfect for supporting the added weight of eBikes - Adjustable length adapts to nearly all bikes with 24"-29" wheels - Hardware included Specifications: - Length: Adjustable - Mount: Center - Attachment: Bracket - Leg Quantity: Double

• Telescoping leg that offers expanded versatility to fit a wide range of bicycles • Crafted of lightweight and durable aluminum alloy • Equipped with a firm spring that prevents movement while riding • Includes a retro adapter plate

Built for Si dropouts. A durable kickstand for Cannondale Si dropouts that is stylish and smartly equipped. Where it thrives: Leisurely rides, in town What it's built for: Durability Highlights: - Stylish and sleek - Light and strong alloy construction - Flat/post brake mount compatible

Keep your bike safely upright and at the ready with the Bontrager Adjustable Bracket-Mount Kickstand. The included hardware and mounting plate makes installation simple, and the center-mount design works with most bikes. Adjustable length adapts for bikes with 24" to 29" wheels and provides a stable upright position. - Center-mount design uses a top plate to clamp the kickstand to the frame near the bottom bracket - Adjustable height fits bikes with wheel sizes ranging from 24" to 29" - Sturdy alloy construction - Includes all required hardware and mounting plates

• Disc brake adapter for NCS fenders • Makes NCS fenders better fit disc brake bikes

An adjustable rear-mount kick stand that fits bikes of all sizes, from 24 inch to 29 inch wheels. Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. Product details - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware

Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware

Single card available in any denomination up to $250. For those looking to get a gift value in excess of $250, multiple cards will be issued. No expiry date, good for as long as you hold onto it!

Suitable for E-Bikes or any heavily loaded bike. - 40kg / 88lb Max load rating - Adjustable for wheels 24 to 29/700c - Legs fold to left away from chain rings - 710g

For orders under $100, actual shipping needs to be added to the order. Customers can contact Alter Ego Sports to avoid being overcharged for shipping at the time of order. All adjustments are made before anything leaves the store.

Bike tow rope This bike tow rope has been designed to make family cycling, especially mountain biking, more fun and enjoyable for everyone. The Bike Taxi is only to be used on paths, where it is easy to take your child up climbs and thus eliminate physical differences. The Bike Taxi is simply installed on the saddle rails of the person towing and is very quick to attach to the stem of the towed bike. Once at the top, the child can easily unhook it. The rope is made of high density polyethylene fibre, which is highly resistant to abrasion, and is self-retracting, without risk. The Bike Taxi is suitable for all types of bicycles and the person towing can use an E-bike Universal - For all types of saddle rails Easy to install - No tools required Easy to handle - Fast attachment and detachment Safe - High-performance reel with complete return of the wire Lightweight and compact - Discreet, under the saddle, for only 140 g

- High resistance clear polyurethane stickers - Protects frame, chainstays, cranks, etc. from impact and scratches - Non-yellowing, tear resistant and non-cracking - Strong and durable adhesive, UV and temperature resistant, waterproof - Visit Zéfal's website for more details

- High resistance clear polyurethane stickers - Protects frame, chainstays, cranks, etc. from impact and scratches - Non-yellowing, tear resistant and non-cracking - Strong and durable adhesive, UV and temperature resistant, waterproof - Visit Zefal's website for more details

- Some do it to protect that beautiful finish on their cranks, and some do it because they can't stand stock crankarm graphics. - Whatever your reason for wrapping and protecting a crankset, we wanted to give you an option with our branding. - These are full-wrap Crankskins that work with most cranksets One pair

Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail. - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)

Light-duty zip tie - 200mm length x 2.5mm - Bag of 100

Reusable zip ties - 200mm long x 7.4mm wide - 100 pieces

Wheels Manufacturing, Zip Ties, Jar of 600, Black

Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit

Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit

Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit

Fast and easy attachment of Topeak Tablet DryBag.

2-bolt dropout mount, allowing a bike to be kept upright. - Made of durable aluminum - Compatible with: Crosstrail and Ariel A1 Disc bikes (up through MY14) - 2012-2014 Hardrock and Myka models - Crossroads and Expedition models (up to MY13) with 2-bolt dropout mount

We've always had a love-hate relationship with kickstands. When they work properly, they're great-a simple and easy way to leave your bike perched. But somehow, they always seem to fail when you least expect it, ending with a loud CRASH! and a scratched-up bike. So, we decided to develop a kickstand that does its job and does it well. And keep in mind, this kickstand was specifically designed for Rolls with 650b x 2.3" tires. - Specifically designed for Specialized Roll and its 650b x 2.3" tires. - Simple mounting takes the sting out of assembly. - Balances your bike flawlessly.

The Sitero Hook attaches to Sitero saddles, allowing bikes to be safely and securely hung in triathlon transition areas. - Replacement Hook for the Sitero

This bike kickstand was developed specifically for the Turbo Tero, allowing you to keep your bike upright on its own. If you need to complete your kit or replace a bike kickstand, this two-bolt dropout mount kickstand will do the job for you. Turbo Vado, Como, and Tero EQ come already equipped with a kickstand. - Durable aluminum construction. - Simple, two-bolt dropout mount allows for easy assembly. - Fits 40mm adapter plates. - Length: 362mm

Zipp Vuka / Stealth Riser Kits - Bolt kits sold separately

This eyebolt and nut set for fender-mounting contains 8 stainless eyebolts, 8 stainless nuts, and 8 plastic stay endcaps. This hardware set is used for mounting Chromoplastic Longboards, Bluemels, and Commuter II Fenders.

Hook-and-loop straps for Speedrocker, Mudrocker, and VeloFlexx. - Fenders include straps - Replacement only

Replacement SKS Rubber Straps for RacebladePro and S-Board

Rubber straps for Speedrocker, Mudrocker, and VeloFlexx. - Replacement only - Fenders include straps

Replacement sliding bridge clip for Chromoplastic Longboard and Commuter II fenders. The replacement clips are made of aluminum with an adjustable bottom so they can be clamped onto the fender. - The 35mm clip works with 35mm fenders. - The 45mm clip works with 45mm fenders. - The 55mm clip works with 50-55mm fenders. - The 65mm clip works with 65mm fenders.

U-Stay Kit for Edge AL Fenders are available as replacement sets.

Front and Rear SKS V-Brace Fender Stay Set with Drawbolts

Protect your chainstay and other wear areas from harsh chainslap and other frame damage maintaining your bike's strength and beauty. The rubberized strip is 50mm wide and each roll is 1000mm long. Wrap up the stay or trim a custom shape to protect the frame. RideWrap protection accessories are made with high-quality RideWrap materials that are bike-tested for long-term durability. All RideWrap protection accessories have been designed to give riders leading protection for their dollar. - Matte black finish - Fits all makes, models, and sizes - Protects from harsh chainslap and other damage - 50mm x 1000mm roll - Designed around mountain bike geometry - Kit includes instructions and pre-install cleaning wipe

For riders looking for comprehensive coverage to protect high risk areas of a dual-suspension eMTB frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed around e-mountain bike geometry - Designed for maximum coverage with minimal trimming - The Covered Dual Suspension eMTB Kit includes protection for toptube, downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

Most riders should protect the lowers and crowns of their Road & Gravel forks. Fork protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the fork. RideWrap protection kits are high-quality polyurethane films that are applied to the fork to protect lowers and crowns from scratches, rock chips, and/or scuffs caused by trail debris, rocks, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed for maximum coverage with minimal trimming - Designed around mountain bike fork geometry - The Covered Fork Kit includes protection for crowns, lowers, and extra pieces to provide approximately 60% fork coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

For riders looking for comprehensive coverage to protect high risk areas of a Hardtail MTB frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10 year warranty. - Matte clear film - Fits all makes, models and sizes - Designed for maximum coverage with minimal trimming - Designed around hardtail mountain bike geometry - The Hardtail MTB Kit includes protection for toptube, full downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

Most riders should protect the lowers and crowns of their MTB forks. Fork protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the fork. RideWrap protection kits are high-quality polyurethane films that are applied to the fork to protect lowers and crowns from scratches, rock chips, and/or scuffs caused by trail debris, rocks, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed for maximum coverage with minimal trimming - Designed around mountain bike fork geometry - The Covered Fork Kit includes protection for crowns, lowers, and extra pieces to provide approximately 60% fork coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

For riders looking for comprehensive coverage to protect high risk areas of a Road or Gravel frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap, and other elements while out on the trails and roads. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed for maximum coverage with minimal trimming - Designed around road and gravel bike geometry - The Covered Road & Gravel Kit includes protection for toptube, full downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker-sheet

- Protects high risk areas from rock chips, wear & scratches - Designed around hardtail steel mountain bike geometry - Fits all makes, models and sizes - Easy install and high durability - Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth - Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day - A low surface energy means that less dirt sticks to your bike and is easier to clean - 10 year warranty against discoloration and cracking - Available in either matte or gloss finish to match factory paint and is nearly invisible once installed

- Extended length down tube piece to protect this high risk area from rock chips, wear & scratches - Fits all makes, models and sizes - Designed around mountain bike geometry - Frame coverage ~10%. Includes downtube and extra pieces - Easy install and high durability - Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth - Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day - A low surface energy means that less dirt sticks to your bike and is easier to clean - 10 year warranty against discoloration and cracking - Available in either matte or gloss finish to match factory paint and is nearly invisible once installed

For the rider who wants a higher durability level of protection for the high-risk downtube region of their frame. Perfect for preventing acute damage plus wear and tear on the downtube. Downtube protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the downtube of the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, and other elements while out on the trails and shuttling. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Nearly twice as thick as our regular film - Fits all makes, models, and sizes - Designed around mountain bike geometry - The Essential Downtube Kit includes protection for downtube and extra pieces to provide approximately 10% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

For the price point rider who wants a core level of protection for key areas of their frame. Perfect for preventing damage from cable rub and acute wear and tear. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed around mountain bike geometry - The Essential MTB Frame Kit includes protection for toptube, downtube, 4 stays, and extra pieces to provide approximately 30% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

For riders who are carrying their bike over the tailgate of a truck. Even with a tailgate pad, which is designed to protect the vehicle and not the bike, damage will occur on the downtube when shuttling without protection. The Shuttle Armor is designed to protect the downtube during transport on the roughest access roads. RideWrap protection accessories are made with high-quality RideWrap materials that are bike-tested for long-term durability. All RideWrap protection accessories have been designed to give riders leading protection for their dollar. - Matte black finish - Fits all makes, models, and sizes - Protects from harsh tailgate rub - Designed around mountain bike geometry - Kit includes instructions and pre-install cleaning wipe

- Additional holder to use the same baby seat on different bicycles - Compatible with Guppy Mini, Bubbly Mini+ and Bilby Junior - Not compatible with rear seat - Baby Seat Mount Type: Stem/Steerer mount - For round tubes only - Position: Front

Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.